FB SERIES PHOTOELECTRIC SENSOR

Opposed mode: sn=61m/152m
Diffuse mode: sn=3.04m/1.52m
Retroreflective mode: sn=9.14m
Polarized reflective mode: sn=4.87m
Fiber optic mode: Glass or Plastic
House size: 46x36x37mm
FB SERIES PHOTOELECTRIC SENSORS SPECIFICATIONS(DC)
Part model Without timing delay With timing delay
Light Source LED Visible red 660nm
Indicator LED Green: Power, Yellow: Output, Red: Margin
Response Time 2 ms
Supply Voltage 10-40V DC (Ripple<=10%)
Output Type NPN/PNP
Max. Load Current 250 mA
No Load Current <30 mA
Max. Leakage Current <10 uA
Voltage Drop <2.5 V
Operation Mode Light or dark switching delectable via switch
Housing Material Glass fiber reinforced plastic
Lens Material Acrylic
Cover Gasket Material Neoprene
Enclosure Rating IP67
Circuit Protection Outputs short circuit and over current protected, Vs reverse polarity protected
Time Options - No delay, On delay, Off delay, One-shot
Time Settings - Adjustable, 0.1...15 s
Ambient Operating Temperature -25 C...55 C
Storage Temperature -40 C...70 C
Relative humidity 5% to 95%
EMC IEC 60947-5-2, Parts 7.2.6.1. 2.3 or RFI>3V/m(in 30-1000MHZ), EFT>1KV, ESD>4KV(contact)
Voltage With Stand Ability IEC 60947-5-2, Part 8.3.3.4 or 500VDC for one min, between all supply terminals connected together and enclosure
Insulation Resistance >20M , with 500V DC megger between all supply terminals connected together and enclosure
Vibration Resistance IEC 60947-5-2, Part 7.4.2 or 10-55HZ, 1.0mm amplitude in x , y and z directions for 30 min
Shock Resistance IEC 60947-5-2, Part 7.4.1 or 30g, 11ms in x , y and z directions for six time each
FB SERIES PHOTOELECTRIC SENSORS SPECIFICATIONS(AC)
Part model Without timing delay With timing delay
Light Source LED Visible red 660nm
Indicator LED Green: Power Yellow: Output Red: Margin
Response Time SPDT EM Relay output: 15ms Solid State Isolated N.O. output: 2ms
Supply Voltage 12-240V DC/24-240V AC
Output Type SPDT EM Relay or Solid State Isolated N.O.
Max. Load Current SPDT EM Relay: 10A at 120VAC, 5A at 240VAC, 10A at 28VAC Solid State Isolate N.O. : 300mA at 240V DC/AC
No Load Current <30 mA
Max. Leakage Current SPDT EM Relay: 0 ; Solid State Isolate N.O. : 1mA at 240VAC
Operation Mode Light or dark switching delectable via switch
Housing Material Glass fiber reinforced plastic
Lens Material Acrylic
Cover Gasket Material Neoprene
Enclosure Rating IP67
Circuit Protection -
Time Options - No delay, On delay, Off delay, One-shot
Time Settings - Adjustable, 0.1...15 s
Ambient Operating Temperature -25...55 C
Storage Temperature -40...70 C
Relative humidity 5% to 95%
EMC IEC 60947-5-2, Parts 7.2.6.1. 2.3 or RFI>3V/m(in 30-1000MHZ), EFT>1KV, ESD>4KV(contact)
Voltage With Stand Ability IEC 60947-5-2, Part 8.3.3.4 or 1500VAC for one min, between all supply terminals connected together and enclosure
Insulation Resistance >20M , with 1500V AC megger between all supply terminals connected together and enclosure
Vibration Resistance IEC 60947-5-2, Part 7.4.2 or 10-55HZ, 1.0mm amplitude in x , y and z directions for 30 min
Shock Resistance IEC 60947-5-2, Part 7.4.1 or 30g, 11ms in x , y and z directions for six time each
FB SERIES PHOTOELECTRIC SENSORS CONNECTION DIAGRAM
NPN / PNP output Wiring diagram
_________________________
SPDT EM Relay Version output Wiring diagram
__________---__________-____
Solid State Isolated N.O. output Wiring diagram

___________________________

Emitter Wiring diagram (AC)
______________________________
Emitter Wiring diagram (DC)

______________

FB SERIES PHOTOELECTRIC SENSORS DIMENSIONS
Cable Version Micro or Euro Connedtor Version
Mini Connector Version Pig tail*